Call Us Toll-Free: 800.917.9353
Just Imagine you can repair Steel using your own propane torch. No Flux! You can repair the thinnest to the thickest metal without
warpage or distortion. Steelaloy gives you the ability to repair motorcycle parts, bumpers, steel castings, oil pans, pipes, buildings, lawn mowers, tractor parts, fences, truck beds, radiators, rims, antiques and so much more.
Strong permanent repairs that last a lifetime!
Melting Range 390 deg f - 570 deg f
Tensile Strength 39,000 psi
Compression Strength 60,000 to 75,000 psi
Shear Strength: 34,000 psi
Hardness ( Brinell-500 kg load) : 100
Density: .25 lbs./cu.in
Elongation: 3% in 2 inches
Electrical Conductivity : 24.9 (%IACS)
Thermal Conductivity: .24 cal / cm3/C
Corrosion Penetration: 300 x 106 in 1 1/R
Storage: Dry Storage; ambient temperature
Size & Packaging
Three Easy Steps
Clean the base metal using anything from a wire brush, file, sand paper, grinder etc. No Flux needed
Heat the base metal using
anything from propane on up.
Do not heat the Steelaloy rod. Remember the heavier the item
the longer it takes to reach about
550 deg f.
As soon as the base metal reaches about 550 deg f the Steelaloy rod will flow. Back off with your heat and make your repair.
Interested in distributing our products? Click here to learn more...